The definitive guide to the kings and queens of the courts

Clay is considered the slowest out of the three due to its composition. When 11-time French Open winner Nadal steps onto the court, he is walking on multiple layers of crushed various gravel and rocks.

The bottom layer is composed of large stones that act as a porous base.

The next layer consists of roughly a foot of crushed gravel.

Next is about 2.5 inches of clinker, which is residue that results from burned rocks.

Near the top is crushed white limestone.

A thin coat of red brick dust is then topped off. The top layer of brick dust aids in adding more friction as it attaches to the ball, which translates to longer rallies.

A tennis ball sailing towards the court at 67 miles per hour at an angle of 16 degrees with no spin will generally fall towards the ground and kick up at an angle of at least 20 degrees, according to court pace testing done by the ITF.

A player like Nadal, who hits much faster and with more topspin, would exaggerate the higher bounce off the court even more.

As a result, clay favors aggressive baseliners who can generate a lot of spin as well as short angled shots near the net. The slower pace can mean longer rallies, and more running and sliding towards balls – a signature trait of playing on clay.

These are the exact attributes Nadal, the most dominant player on clay, possesses and is why he is so dominant on this surface.

On the opposite end of the pace spectrum are the speedy grass courts.

If you peeled back the layers of a court in Wimbledon, at the bottom would be roughly 7 inches of stone and angular construction aggregate over a network of drain pipes.

Then 2 inches of binding layer that includes washed pea gravel are laid.

10 inches of topsoil composed of clay, silt and sand are filled.

A precise 8 mm (0.3 inches) of lawn are rolled out on top. Only 100% perrenial rye grass is used at Wimbledon – a breed often used in various sports due to its durability and resilience.

Grass is perceived to be faster due to the way balls tend to skid or slip on contact, creating a lower exit angle.

Lower balls mean fast-flying balls are that much harder to get to for players and result in shorter points.

Powerful serves, slices and speed are rewarded on this slicker court. Federer and Serena Williams are current players best known to dominate on this surface.

Hard courts like those at the Australian and U.S. Open are the most common type of court in both recreational and pro scenes. Court pace can generally range from medium-slow to medium-fast paces between clay and grass depending on how it's made.

Compact foundation is the base.

Around 2.5 inches of asphalt are then filled in.

If specified, a cushion system.

An acrylic top coat is then applied. The amount of sand used and number of coat layers can either make the surface play slower or faster.

If the same ball previously on clay and grass bounced on a hard court, it would bounce between the two trajectories. It also produces the most consistent ball behavior since it is a consistently hard and flat surface.

Hard courts favor play styles similar to grass. Djokovic, as well as Federer and Williams, currently dominate this surface.

The effects the surfaces have on the game are even more striking when looking at important elements of the game.

Average rally length falls off on grass for both men and women since they are harder to get to.

Rally length and distance chasing down balls, in comparison, are highest on clay for the men's tour. The trend is reversed on the women's side, though with small margins.

Aces for men and women are more common on the faster surfaces